Results 1 to 2 of 2

Thread: DMK 33UJ003 Camera LabView Vision Development Module Exposure

  1. #1
    Join Date
    Mar 2018
    Posts
    1

    DMK 33UJ003 Camera LabView Vision Development Module Exposure

    Hello,

    I am trying to develop a code for DMK 33UJ003 camera in labview using IMAQdx. the camera is connected and it gives me an output also. My question is,

    1. Did anybody previously tried to implement algorithm for auto exposure?
    2. Which one is more suitable to do programming in labview? IMAQdx or IC Imagine?
    3. If its IC Imagine then can any body please share the basic code which showing me live image?
    4. Can anybody please explain me hwo to calculate gain factor in Imagining Source cameras?

    Any help would be really appreciate.

    Thanks

  2. #2
    Join Date
    Jan 2003
    Location
    Bremen, Germany
    Posts
    4,893

    Re: DMK 33UJ003 Camera LabView Vision Development Module Exposure

    Hello

    First of all, I suppose, you use the USB3Vision interface in IMAQ

    1. Did anybody previously tried to implement algorithm for auto exposure?
    We did that in the camera's firmware. Why do you want to rebuild that?

    2. Which one is more suitable to do programming in labview? IMAQdx or IC Imagine?
    If my guess about you use USB3Vision is correct, then please use USB3Vision and not the IC LabVIEW extension.

    3. If its IC Imagine then can any body please share the basic code which showing me live image?
    Download the IC Imaging Control LabVIEW Extension from our website under "Support", but only if you do not use USB3Vision.

    4. Can anybody please explain me hwo to calculate gain factor in Imagining Source cameras?
    It is in dB. Thus there is not much to understand.

    It seems, you are quite new to cameras, LabVIEW an IMAQ. Therefore, I recommend to look also on the National Instruements documentations about Measurement and Automation Explorer.
    Best regards
    Stefan
    IC Imaging Control Support

Similar Threads

  1. DFK 33UJ003 anyone using one of these for 4k?
    By BabaG in forum Hardware and Driver
    Replies: 5
    Last Post: June 1, 2017, 22:25:16
  2. Development a software with IC Imaging Control Active X in LabVIEW
    By hushhushhwn in forum IC Imaging Control ActiveX
    Replies: 3
    Last Post: June 12, 2015, 13:58:56
  3. GigE Vision camera cannot be seen in Matlab
    By alfayadd in forum Hardware and Driver
    Replies: 4
    Last Post: May 20, 2014, 12:17:18
  4. Labview Exposure problem
    By Sanjay P in forum IC Imaging Control ActiveX
    Replies: 1
    Last Post: March 12, 2013, 15:01:33
  5. Adjusting Exposure in LabVIEW?
    By videmus in forum IC Imaging Control ActiveX
    Replies: 5
    Last Post: August 5, 2008, 09:06:39

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •