Results 1 to 2 of 2

Thread: DFK21F04 Camera and Windows 7 (x64)

  1. #1
    Join Date
    Jan 2005
    Posts
    6

    DFK21F04 Camera and Windows 7 (x64)

    Hello,

    I am trying to connect DFK21F04 Camera on a desktop with Windows 7 (x64). The camera gets detected, however, IC Capture is not able to get the live image and gives an error stating that LIVE IMAGE COULD NOT BE ENABLED OR NOT ENOUGH BANDWIDTH. Tried other cameras and another PC (with the same OS) but result is the same. Kindly advise.

    Regards,

    Azeem Anwer

  2. #2
    Join Date
    Jan 2003
    Location
    Bremen, Germany
    Posts
    4,861

    Re: DFK21F04 Camera and Windows 7 (x64)

    - use a 1394a PCI board, not 1394b.
    - Install correct driver 4.4.0.1 (you already did, i guess)

    Try: You must install the legacy driver for your 1394 bus.

    You can load the legacy 1394 bus driver using the following steps:

    1. In device manager, select the properties for the 1394 controller.

    2. Select the 'Driver' page and 'Update Driver' button.

    3. Select 'Browse my computer for driver software.'

    4. Select 'Let me pick from a list of device drivers on my computer.'

    5. Within the list of devices, you will see a device with '(Legacy).' This is the 1394 bus driver that previously shipped in Windows. Select this device and select 'Next.'

    This will install the legacy 1394 bus driver on Windows 7. You can use the same steps, changing the device you select in step 5, to revert back to the new 1394 bus driver.
    Best regards
    Stefan
    IC Imaging Control Support

Similar Threads

  1. WAt is the difference between Industrial camera Dsx & dfk21f04
    By SakthiPrabhuGS in forum IC Imaging Control ActiveX
    Replies: 1
    Last Post: October 5, 2009, 10:08:46
  2. DFK21F04 White Balance
    By Azeem Anwer in forum IC Imaging Control C++ Class Library
    Replies: 2
    Last Post: March 4, 2005, 12:02:37
  3. DFK21F04 White Balance
    By Azeem Anwer in forum IC Imaging Control C++ Class Library
    Replies: 0
    Last Post: March 3, 2005, 15:37:22
  4. Software Triggering of DFK21F04
    By Azeem Anwer in forum IC Imaging Control C++ Class Library
    Replies: 4
    Last Post: February 1, 2005, 10:19:07
  5. 2 cameras DFK21F04 under LabVIEW!!
    By Henning in forum IC Imaging Control ActiveX
    Replies: 4
    Last Post: May 25, 2004, 16:45:26

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •