Results 1 to 4 of 4

Thread: DFK 22BUC03 unable to fetch images in IC Capture

  1. #1
    Join Date
    Dec 2014
    Posts
    16

    DFK 22BUC03 unable to fetch images in IC Capture

    Hello,
    I recently purchased a DFK 22BUC03, I am unable to view images in IC Capture.
    The error and driver shown in the images attached.

    2015-06-13 01.12.15 pm.png2015-06-13 01.14.07 pm.png2015-06-13 01.14.39 pm.jpg

    What could be the problem? I am using a M12 lens with an adapter.

    Also using standard mini usb cable, is any special mini usb cable needed?

    Thank You.

  2. #2
    Join Date
    Jan 2003
    Location
    Bremen, Germany
    Posts
    4,860

    Re: DFK 22BUC03 unable to fetch images in IC Capture

    Hello

    Unfortunately you did not let me know the computer model you use. Therefore a common guess from the Forum's FAQ:
    http://www.theimagingsourceforums.co...faq_ic_pismusb
    Best regards
    Stefan
    IC Imaging Control Support

  3. #3
    Join Date
    Dec 2014
    Posts
    16

    Re: DFK 22BUC03 unable to fetch images in IC Capture

    Quote Originally Posted by Stefan Geissler View Post
    Hello

    Unfortunately you did not let me know the computer model you use. Therefore a common guess from the Forum's FAQ:
    http://www.theimagingsourceforums.co...faq_ic_pismusb
    Hey! I was able to solve it by plugging into another computer. But I am facing an issue with the focus. Probably due to wrong lens selection. Can you advice if the setup is correct?

    The current configuration was suggested by Jason Covar, Sales Manager, Imaging Source.

    Requirement:

    Working distance of 30mm-60mm, and an angle of 40degrees would be suitable according to me, the application is high speed text and barcode capturing.

    Suggested setup which I am using:
    1) TLH CCS - The Imaging Source holder for board lenses - (M12x0.5), C/CS-Mount
    (Which acts as the adapter)

    2) TBL 2.1 - The Imaging Source board lens 12x0.5 mm
    Format = 1/3"
    Focal Length = 2.1 mm
    Iris = 2
    (Which is the lens)

    Problem:
    The camera is completely out of focus, can only see light sources that also completely out of focus. A white tube light is captured as a white oval and close range objects are not seen altogether.

    Please suggest appropriate lens/multiple lens options that can be used?

    Thank You.

  4. #4
    Join Date
    Jan 2003
    Location
    Bremen, Germany
    Posts
    4,860

    Re: DFK 22BUC03 unable to fetch images in IC Capture

    Hi

    Focussing is done by screwing the lens as far as you see a sharp image. Screwing in the lens as deep as possible wont bring a sharp image. If the lens is loose, you can use the little screw on the side of the TLH CCS or some Teflon tape around the lens thread.

    The lensholder and lens should do the job, the minimum object distance is below 60mm.
    Best regards
    Stefan
    IC Imaging Control Support

Similar Threads

  1. IC Capture software are getting gray images
    By carlosb in forum Hardware and Driver
    Replies: 10
    Last Post: May 13, 2014, 15:04:36
  2. Problem with DFM 22BUC03-ML
    By edparber in forum Hardware and Driver
    Replies: 4
    Last Post: February 15, 2013, 16:20:42
  3. DMM 22BUC03-ML dimensions...
    By dllau in forum Hardware and Driver
    Replies: 1
    Last Post: March 19, 2012, 10:26:16
  4. IC Capture 2.2 - Unable to turn off Auto-exposure?
    By dwsubc in forum Astronomy Cameras Support Forum
    Replies: 2
    Last Post: November 11, 2010, 16:01:07
  5. Want to Capture Avi and images simultaneously
    By Unregistered in forum IC Imaging Control .NET
    Replies: 1
    Last Post: September 14, 2004, 11:22:54

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •