PDA

View Full Version : DFK21F04 Camera and Windows 7 (x64)



Azeem Anwer
July 21, 2015, 11:53:11
Hello,

I am trying to connect DFK21F04 Camera on a desktop with Windows 7 (x64). The camera gets detected, however, IC Capture is not able to get the live image and gives an error stating that LIVE IMAGE COULD NOT BE ENABLED OR NOT ENOUGH BANDWIDTH. Tried other cameras and another PC (with the same OS) but result is the same. Kindly advise.

Regards,

Azeem Anwer

Stefan Geissler
July 21, 2015, 12:56:14
- use a 1394a PCI board, not 1394b.
- Install correct driver 4.4.0.1 (you already did, i guess)

Try: You must install the legacy driver for your 1394 bus.

You can load the legacy 1394 bus driver using the following steps:

1. In device manager, select the properties for the 1394 controller.

2. Select the 'Driver' page and 'Update Driver' button.

3. Select 'Browse my computer for driver software.'

4. Select 'Let me pick from a list of device drivers on my computer.'

5. Within the list of devices, you will see a device with '(Legacy).' This is the 1394 bus driver that previously shipped in Windows. Select this device and select 'Next.'

This will install the legacy 1394 bus driver on Windows 7. You can use the same steps, changing the device you select in step 5, to revert back to the new 1394 bus driver.