PDA

View Full Version : DMM 25GP031-ML questions



nikkadim
February 13, 2014, 18:29:22
Do you have SDK Examples for this GigE camera?
Do you use your own driver to communicate with this camera for Windows?
Can I use ROI during capturing to increase the frame rate?
Can I use Global shutter (according sensor spec)?
Can I power this camera with external power source instead of PoE?

Thank you.

Stefan Geissler
February 13, 2014, 18:37:51
Hello


Do you have SDK Examples for this GigE camera?
Yes. You may download IC Imaging Control from http://www.theimagingsource.com/en_US/support/downloads/. The samples are installed into your "Documents" directory in "IC Imaging Control 3.3".


Do you use your own driver to communicate with this camera for Windows?
If we use our IC Imaging Control SDK, yes. If you use other programs or libraries such as LabVIEW or Halcon, you can use their GigE Vision implementation. For them, no software from our side is needed.


Can I use ROI during capturing to increase the frame rate?
Yes.


Can I power this camera with external power source instead of PoE?
As far as I know, yes. There should be a Hirose connector on the backside of the camera.

nikkadim
February 14, 2014, 17:06:37
Hello


As far as I know, yes. There should be a Hirose connector on the backside of the camera.

Hm, but I'm talking about DMM 25GP031-ML (board camera) so there is no Hirose connector on it, or I'm wrong?

Stefan Geissler
February 17, 2014, 09:53:50
Hello


Hm, but I'm talking about DMM 25GP031-ML (board camera) so there is no Hirose connector on it, or I'm wrong?
You are right. The camera comes with an open end cable.