PDA

View Full Version : trigger-event?



Slaughter1387
November 13, 2013, 12:51:23
I'm pretty new to VB so i hope my questions aren't too obvious.
I want to make and save images using the DFK 23G274 by pushing an external trigger. For this purpose i'm using the .MemorySnapImage()- and .MemorySaveImage-methods. The problem is i can't find an event which activates on trigger.
Does something like this exist or do i have to go on using an infinite loop starting the methods right after the previous ended(which i don't really want)?

Another question: Is there a possibility to reduce the networktraffic, because i can only use 3.7 fps with rgb24(1600x1200) at 100mbits/s.

Stefan Geissler
November 13, 2013, 13:08:19
Hi

Do not use trigger together with MemorySnapImage. Use "ImageAvailable" event instead. Also set the property "LiveCaptureContinuous" to true.
Please refer to
http://www.imagingcontrol.com/en_US/support/documentation/dotnet/event_descICImagingControl_ImageAvailable.htm
http://www.imagingcontrol.com/en_US/support/documentation/dotnet/prop_descICImagingControl_LiveCaptureContinuous.ht m


Is there a possibility to reduce the networktraffic, because i can only use 3.7 fps with rgb24(1600x1200) at 100mbits/s.
I am absolutely suprised to read, the camera works on 100mBit at all. In my tests, this did not work. To answer the question: No, faster is not possible, because the 100mBits are too slow.