PDA

View Full Version : DMM 22BUC03-ML and latest firmware



nikkadim
July 4, 2013, 14:41:18
I have >30 x DMM 22BUC03-ML new cameras, and also have firmware (not sure that this is lates) firmwareupdate_dmk22xuc03_93.exe, should I upgrade all my cameras to this firmware or may be you have the latest? How I can check the current version of firmware? Do you have at least small description for firmware v.93 (what's new, what fixed)?

Thank you.

Stefan Geissler
July 4, 2013, 15:40:49
If there is no problem with your cameras, then there is no need to take the risk to destroy them with a firmware update.

nikkadim
July 4, 2013, 18:18:29
If there is no problem with your cameras, then there is no need to take the risk to destroy them with a firmware update.

Ok. It make sense.

We set up a large, complicated and expensive experiment with >30 cameras, and we don't want lose time(money) to figure out what wrong with cameras during experiment, so could you please provide us a changelog for .93 f/w? If this information is closed, can we count on private message?

Thank you,
and I hope for understanding.

Stefan Geissler
July 5, 2013, 10:21:54
I fully understand you.

So, which problem do you encounter, so you think, you need a firmware update?

If there is no problem, it is not recommended to update the firmware.

nikkadim
July 5, 2013, 14:07:24
I fully understand you.

So, which problem do you encounter, so you think, you need a firmware update?

If there is no problem, it is not recommended to update the firmware.

I just want to make sure I have the latest software on a board.
I have experience with upgrading TIS cameras, I'm familiar with the Arne opensource project with firmware tool.

This cameras connected to small custom made Linux based (ARM) computers with unofficial driver. And I want to get quality images with maximum FPS without any issues. That's why I'm asked you about change log for this firmware.

PS: I just checked firmware version for new cameras (I've received them last week) and they have v.116 my old cameras have v.93.
I would like to ask you about firmware v.116 to upgrade my old cameras, because I prefer to use the same version of software/firmware in one project. Thank you!

PPS: I have dmk22uc03_145.euvc firmware, what is the difference between v.145 and .116 for 22uc03 camera?
What difference between dmk42uc03_143.euvc and v.135 for 42uc03 camera? We using this cameras for another project. Thank you!

Stefan Geissler
July 8, 2013, 10:21:30
I must admit, regarding Linux I have no experiences, but was no there a special firmware?

I also do not provide any firmware update as download in the forum. Please create a request at http://www.imagingcontrol.com/en_US/support/case/

Thank you in advance.