PDA

View Full Version : More GPIO?



MarcvD
March 1, 2013, 16:38:24
Dear The Imaging Source,

As you might know we are working on the development of a scanner device. However, this is not the only task the scanner has to perform. Currently we are working with the DFM 72BUC02-ML, which has to my knowledge 4 extra pins on the back. One for ground, one for GP Out, one for trigger+ and one for trigger-. For out setup we are using the trigger and the GPout. Therefore the trigger- and ground are connected to the ground. However, there is a need for more GPIO possibilities. Does the imaging source offer a camera which can provide more GPIO possibilities, or maybe another protocol port? i2c or rs232? where the trigger possibility is still available?

Thanks in advance.

Stefan Geissler
March 4, 2013, 09:34:30
Hi

I can not promise anything, since the cameras are a little bit limited by hardware. However, design of special cameras can be discussed with project management. If you are interested, you may make a contact through http://www.theimagingsource.com/en_US/company/contact/