PDA

View Full Version : Flickering lighting



Krieg
August 19, 2009, 18:21:11
I am using a DCL/RL.WI 4540 lighting unit connected to a DMK 41BF02.H camera, and I am having an issue with the lighting unit flickering and not reliably providing light. I have another setup with these two models that is working correctly, but this particular one is not. Any suggestions?

Sascha Schmidt
August 20, 2009, 11:04:23
Hallo,

you can setup the lightning settings with the VCD Strobe property.
In order to use constant lightning without flickering, you have to set the strobe mode to "constant".

The easiest way to do this, is using the build in property dialog.

Stefan Geissler
August 21, 2009, 09:09:56
I am using a DCL/RL.WI 4540 lighting unit connected to a DMK 41BF02.H camera, and I am having an issue with the lighting unit flickering and not reliably providing light. I have another setup with these two models that is working correctly, but this particular one is not. Any suggestions?

Do you use constant light or does the ring light is used as strobe? If it should run as constant light source but flickers, then I guess, there is something broken. I suggest to contact us through http://www.imagingcontrol.com/en_US/support/case/ so we can create an RMA case.