PDA

View Full Version : Maxim DL and DMK 41AU02 B&W



carlomuccini
June 23, 2009, 14:12:39
I downloaded the latest version of the drivers but with MaximDl 5 does not start even.
With Astroart 4 instead starts but does not work very well.

Carlo

Stefan Geissler
June 23, 2009, 15:10:37
Here in this forum an ASCOM driver is available for MaximDL.

For more information you may ask the support of the programs you use. Their authors can go in contact with me, if there are technical problems.

carlomuccini
June 23, 2009, 16:03:33
Here in this forum an ASCOM driver is available for MaximDL.

For more information you may ask the support of the programs you use. Their authors can go in contact with me, if there are technical problems.

Unfortunately, if you refer to the link

http://deepsky.endofinternet.org/download/DMKCCDSetupV1.2.exe

does not work. Is possible to download the ASCOM driver from somewhere else?
Thank you

Stefan Geissler
June 23, 2009, 16:07:29
I do not know. It is a third party product.

Stefan Geissler
August 13, 2009, 10:30:47
Hello,

We were on contact with the Maxim DL programmers and they fixed the problem with the high resolution USB cameras (31 and 41) in Maxim DL version 5.07.

carlomuccini
August 14, 2009, 09:24:06
Hello,

We were on contact with the Maxim DL programmers and they fixed the problem with the high resolution USB cameras (31 and 41) in Maxim DL version 5.07.

Hi Stefan
Now I have download the new 5.07 MaximDl version.
No mention about the Imaging Source Camera.
I must use the Ascom driver from third party (Gerrit) ?
Thx

Carlo

Stefan Geissler
August 14, 2009, 09:49:13
Carlo,

the cameras run as "DirectShow" cameras.

carlomuccini
August 14, 2009, 16:47:36
Ok I downloaded MaximDL 5.07 and I connected as VideoDS.
You can indicate how to set up the various options?
I cannot run the long exposures . The duration is not determined by MaximDL.
The new driver should not be mistaken but I think that do not works well

Thx

Carlo

Stefan Geissler
August 17, 2009, 09:04:42
Hi Carlo


You can indicate how to set up the various options?

I am very sorry, I can not do this right now, because I do not own Maxim DL.

Stefan Geissler
August 17, 2009, 09:23:04
Carlo,

I had a look into the camera properties using Graphedt. The properties for exposure show the long exposure times.
http://www.theimagingsourceforums.com/attachment.php?attachmentid=1001&d=1250497378

carlomuccini
August 17, 2009, 13:10:08
Carlo,

I had a look into the camera properties using Graphedt. The properties for exposure show the long exposure times.
http://www.theimagingsourceforums.com/attachment.php?attachmentid=1001&d=1250497378

Yes, I do
I use your trick like 20/1 for 20 sec
The problem is important; MaximDL do not comunicate with the properties and the duration of exposition over 1 sec is random.

Regard

Carlo

Stefan Geissler
August 21, 2009, 09:21:14
Yes, I do
I use your trick like 20/1 for 20 sec
The problem is important; MaximDL do not comunicate with the properties and the duration of exposition over 1 sec is random.

Regard

Carlo

I am very sorry, you lost me somewhere. Maxim DL should be able to show the dialog from the post listed above. If not, you may ask the Maxim DL support, because I am not able to do Maxim DL support. I do not own or work with Maxim DL.