Device Detection

[mfi]

Hallo,
I've got a problem with "DMK 31BF03". I've connect 4 cams (Fire wire) to the PC and it doesn't detect all cams (every single cam is ok). Mostly one cam isn't detected...

[Stefan Geissler]

I would like to know, whether all four cameras are listed in the Device Manager.

[mfi]

I think no.
Could it be that I must reinstall the driver?

[Stefan Geissler]

Please connect all four cameras. Then start the driver installation. Check, whether 4 cameras are detected. There is a "(4)" behind the camera names.

[mfi]

hello,
I've got 4 cams (DMK 31BF03) on 2 Firewire cards and not all 4 are detected. I installed the driver (it was all correct - serials...). Do you know any reason

[Stefan Geissler]

I would like to know, whether all four cameras are listed in the Device Manager.

[mfi]

not always - when I installed the drivers yes - later no

[Stefan Geissler]

If the cameras were connected to the computer, then they are listed in the Device Manager, regardless, whether a driver was installed. From this point of view, I guess, there may is a loose contact in your cables.

[mfi]

I don't think so, because when I reinstalled the drivers always all cams are detected.

[Stefan Geissler]

Yes, this is the interresting point. The Device Manager, aka Windows, must display the cameras, even if no driver was installed. Thus I am a little bit puzzled. What are the serial numbers of your cameras?