PDA

View Full Version : 21AF04AS Codec installed??



sumodaz
May 12, 2008, 22:22:55
Hi all

I only have the Y800 codec installed despite a reinstallation of the drivers and software. Registax doesn't like my AVI's but others appear to have more than one codec installed.

Any suggestions as to why I only have one, and or why Registax doesn't like the file?

Thanks
DJ

sumodaz
May 12, 2008, 22:43:23
Found it!

I worked out I hadn't changed the codec in the recording dialog box!!
DOH!!!!

Stefan Geissler
May 13, 2008, 10:56:52
The latest version of IC Capture.AS has Y800 as default, no longer the DV Encoder that will disturb the raw data.

For AVI capture and Registax processing there are many posts in the forum. I also created a small tutorial, that can be found in many posts of this forum and will be published on http://www.astronomycameras.com soon:
ftp://tis_ftp:Imaging199@ftp.theimagingsource.com/Imaging/101abc/astronomycapture.pdf

Laurent
May 24, 2008, 22:18:24
Hi Stefan,


The latest version of IC Capture.AS has Y800 as default, no longer the DV Encoder that will disturb the raw data.

I have IC Capture.AS version 2.0.1.483 (512.512 bytes). Is it the latest one? If a newer version exists, is it possible to get it from the website?

Laurent

Stefan Geissler
May 26, 2008, 09:51:44
Laurent,

No, this is not the last one, but it is recent. The newer version only has the change listed above. We did the change after you reported your problem with the codec selection.

Laurent
May 26, 2008, 10:16:19
Thanks for your reply Stefan.
Is there a place where the latest version is available for download?
I've seen a link on this page: http://www.theimagingsource.com/fr/products/software/windows_apps/iccapture/overview/.
But it is for IC Capture (not AS); it is a 14 december 2007 trial version.

Laurent

Stefan Geissler
May 26, 2008, 10:19:58
Laurent,

simply contact me here: http://www.imagingcontrol.com/support/case/
I will send the new setup to you as FTP download link.

Laurent
May 26, 2008, 20:56:27
Stefan,

Thanks for your answer. I followed that link but I couldn't send the form because I couldn't answer some questions about Imaging Control. I don't use it. My whish was about the latest version of IC Capture.AS since I understood (maybe I misunderstood) a newer version has been released.

Laurent

Stefan Geissler
May 27, 2008, 08:59:31
Laurent,

Simply put something in the questions. Because of too much spam, it takes one hour a day checking all spam for false positives, I do not want to publish my email address in the forum any more.

You only need to tell me, that you want the IC Capture.AS update. I will ignore the other information (except your email address).