PDA

View Full Version : Dxx mechanical specification



marsel60
June 17, 2007, 12:27:30
Hello guys,
I navigate through TIS web pages in order to find the mechanical specification (distance) between CCD and front optics without success.
Could you please so gentle to provide me the link were I can find it?
Thanks in advance to everybody.
-Marco

Rainer
June 17, 2007, 23:02:04
Hi Marco,

The TIS cameras are for C or CS mount lenses and that means that the chip is 12.5mm behind the surface of the ring in CS-Mount configuration and 17.5mm if you use the 5mm distance ring and 17.5 mm is for C-mount.

The CS or C-mount thread is 1" diameter and has 32threads per inch as pitch.

marsel60
June 19, 2007, 07:19:35
Hola Rainer, :)
thank you so much for information. Long time ago I found such information on TIS drawing/specification but today no more. Probably the standard C/CS mount specification convinced TIS to eliminate it. Anyway, thanks again.;)
Clear skies.
-Marco

marsel60
June 19, 2007, 19:42:07
I found (finally) the C/CS documentation on TIS pages. Here is the link:
http://www.theimagingsource.com/en/resources/whitepapers/download/basicopticswp.en.pdf
In case this information will be asked from other guys. ;)
-Marco