Trigger Prohibition Period

[Ole Jakobsen]

Hello,

I'm using a Sony DFW-SX900 camera. This camera has a so-called "Trigger Prohibition Period" during which all trigger signals to the camera will be ignored. The Trigger Prohibition Period lasts until the last triggered image has been transfered to the computer.

Is there any way of knowing (any property etc.) if the camera is ready to be triggered, before issuing a trigger signal to the camera?

Regards,
Ole Jakobsen

[Stefan Geissler]

Ole,

I found no way, to check, whether the camera can be triggered again. I recognized only, that the maximum trigger frequency for good image results is about 10 to 15 Hz.